Shush

Tecsound SY100 for Stud Walls

 99.95 € 19.48 per m2

Tecsound SY100 is a heavier version of our Tecsound SY70 product. It is a dense, polymer-based, asphalt-free, viso-elastic soundproofing membrane, that provides excellent acoustic insulation in different building elements particularly stud walls and partitions. It has a self-adhesive backing which will bond to a wide variety of surfaces. Tecsound 100 weighs 10kg per m2 at only 5.5mm thickness.

 

53 in stock

Product Quantity Item Price
Volume Discount 5 - 99  94.96
Category: Tags: ,
Description

Tecsound SY100 is a heavy duty self adhesive soundproofing product used in lightweight walls and ceilings. It’s unique visco-elastic properties combined with high mass provides excellent sound insulation properties. Use Tecsound SY100 as a sandwich layer between two layers of plasterboard, OSB or Plywood to greatly improve soundproofing performance. Tecsound SY100 weighs 10kg per m2 at only 5.5mm thickness. 4.8m2 per roll. Also available in a lighter 7.0kg version.

 

Features

• 10kg weight per m2
• Adds mass to surfaces thus increasing sound insulation
• Self adhesive – particularly suitable for vertical and overhead situations
• High sound damping capacity on metal surfaces
• High flexibility
• Adaptable to uneven and irregular surfaces
• Easy to apply
• Cold and heat resistant
• Excellent ageing resistance
• Rotproof

 

Applications

• Soundproofing against airborne noise in vertical walls with low surface density (lightweight partition walls or boards made of different materials).
• Soundproofing against airborne noise in ceilings and lightweight roofs
• Reduction of impact noise level in all types of floors, sandwiched between floor slabs and loose-laid flooring.
• Damping of impact noise caused by rain or hail on metal decks.
• Combined with sound-absorbent materials, it offers products with high acoustic performance..
• Can be used to dampen resonance on the thin metal bodywork of cars and other types of machinery.

 

Additional Information
Brand

Tecsound

Length

4.0m

Width

1.2m

Thickness

5.5mm

Weight

10kg/m2

Density

2000kg/m3

Colour

Yellow

Fire Rating

B-S2 d0 according to EN13501-1

Thermal conductivity coefficient (λ)

0.037

How to Install Tecsound SY100 on a Stud Wall

How to Install Tecsound SY100 on a Stud Wall

  • Remove the Tecsound SY100 from it’s packaging and roll out.
  • Measure your wall height and cut the Tecsound to size.
  • Remove the protection layer and expose the adhesive from the top 20cm.
  • Position the Tecsound SY100 at the top of the wall and press firmly into place.
  • At the same time pull the protection layer from the back and press firmly as you go down the wall.
  • Repeat this until you have the wall covered with Tecsound. Butt joints together.
  • Fix plasterboard to the wall with screws and leave a 5mm gap around the perimeter.
  • Fill gap with acoustic sealant.
  • Tap & joint to finish.